Opensolaris 2008.11 active/active disk replication

*This post is IN PROGRESS and will/may be edited*
* I have given up on this. I've gotten zero help from Sun, and others have posted that THIS DOES NOT WORK - Good luck with OpenSolaris and AVS / ZFS replication*

In this post, I'll describe what I had to do to get Seemless AVS /ZFS replication on my homegrown OpenSolaris box. This is based on this blog entry http://blogs.sun.com/AVS/entry/avs_and_zfs_seamless . That is ZFS (Zeta File System), AVS (Availability Suite) using the svm (Sun Volume Manager). It assumes you are intimately familiar with Solaris, and you have the budget of a large corporation. I run a small email service based on FreeBSD, and don't have any Solaris experience. The following is what I've learned.

Install. As I've already said, the installation is extremely easy. I've discovered that in this particular case, that's a bad thing. Solaris has a unique way of putting data on a disk. Typically, an OS will create a partition for itself on a drive and that's it. Solaris takes that a step further by creating 'slices' inside the Solaris partition. Historically, each slice was a UFS mount point. So one slice would be usr, another would be var, etc. You see this on other OSs, using regular primary and extended partitions. With the advent of ZFS, I think this is probably unncessary, but there are legacy applications such as Availability Suite, that use these slices. This is where our problem begins... Read on for a fix.

My system is configured as follows:
2 80GB drives in hardware RAID 1 on an Areca controller
6 500GB drives JBOD using the MB controller

The feeling I get from #opensolaris is that I'm an idiot for doing hardware RAID at all. Personally, I just don't trust software RAID for an essential system's boot drives. No big deal I think, until I get to the part where AVS replication needs to be configured. This needs to be said at the beginning. You MUST have a free slice for svm. svm uses what's called a metadb to store information about the soft volumes you are creating. The OpenSolaris install creates a single root slice, and you're screwed because you have no fdisk options. Newbies, use format to READ the drive info. I know it's a bit disconcerting to type format at the command line without knowing what it will do, but it's pretty smooth:
root@sysvoltwo:~# format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
0. c3t0d0
/pci@0,0/pci1022,9604@4/pci17d3,1200@0/sd@0,0
1. c4d0
/pci@0,0/pci-ide@11/ide@0/cmdk@0,0
2. c4d1
/pci@0,0/pci-ide@11/ide@0/cmdk@1,0
3. c5d0
/pci@0,0/pci-ide@11/ide@1/cmdk@0,0
4. c5d1
/pci@0,0/pci-ide@11/ide@1/cmdk@1,0
5. c7d0
/pci@0,0/pci-ide@14,1/ide@1/cmdk@0,0
6. c7d1
/pci@0,0/pci-ide@14,1/ide@1/cmdk@1,0
Specify disk (enter its number): 0
selecting c3t0d0

As you can see, '0' is my hardware RAID, and 1-6 are my JBOD.
Then we type 'part' to enter the partition manager, and 'print' to print the partition:
Current partition table (original):
Total disk cylinders available: 9723 + 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 8480 64.96GB (8480/0/0) 136231200
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 8481 64.98GB (8482/0/0) 136263330
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0

Now at this point what I've done is a full install of OpenSolaris onto a 65GB Solaris partition. You have the 'root' slice which is almost 100% of the Solaris partition, the backup slice, which is 100%, and the boot slice. This leaves about 15GB to 'expand' to. What I did was the following.
First save the slice info somewhere as you'll need it again.

1. Boot off your OpenSolaris install disk
2. Open a terminal
3. #pfexec format (pfexec lets you run format as root)
4. select your drive, type fdisk:
format> fdisk
Total disk size is 9726 cylinders
Cylinder size is 16065 (512 byte) blocks

Cylinders
Partition Status Type Start End Length %
====== ===== ======== ==== ==== ==== ===
1 Active Solaris2 1 8482 8482 85

(I've reentered these numbers from memory, so they may not be exact)

Now, we delete that partition, and create a new one:

Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris2 1 9725 9725 100


Now that we've re-created the partition, the slices will be messed up.
quit from format, and type fdisk to enter fdisk
You'll need to re-create the root slice based on your saved data.
Then add a slice 7 for your metadb - when you're done, it should look similar to this:

Current partition table (original):
Total disk cylinders available: 9723 + 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 8480 64.96GB (8480/0/0) 136231200
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 9722 74.48GB (9723/0/0) 156199995
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 8481 - 9722 9.51GB (1242/0/0) 19952730
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0

I stopped one cylinder short of the last, just to be safe.

Because of the fdisk fix we can FINALLY create our metadb on our metadb slice!
# metadb -a -f -c 4 /dev/rdsk/c3t0d0s7

----------------- Install and Configure AVS ---------------------

Now we can reboot the system, log in, and continue with our AVS install.
In the package manager, do an 'Update All'.
After you've rebooted, go back into the Package Manager and search for 'avail'. The descriptions should now be there, and all of the packages for the availability suite will be found.

# dscfgadm 'y' to start avs service.
Would you like to start the services now? [y,n,?] y
If get you something like:
svcadm: Instance "svc:/system/nws_scm:default" is in maintenance state.
nws_scm failed to enable

Then:
#svcadm enable nws_scm
Then re-run dscfgadm

#dscfgadm -i to verify services are all running - enable as necessary.

Now, as we've gotten from the format command, my JBOD disks to be replicated are:
c4d0,c4d1,c5d0,c5d1,c7d0,c7d1

Most of the below is replicated from the linked blog above, corrected for my disk set.
I had to create and delete a zpool on each disk to 'initialize' each drive (place an EFI label):
zpool create -f temp c4d0; zpool destroy temp

On one drive run:
#dsbitmap -r /dev/rdsk/c4d0s0 | tee /tmp/vol_size

#VOL_SIZE="`cat /tmp/vol_size| grep 'size: [0-9]' | awk '{print $5}'`"
#BMP_SIZE="`cat /tmp/vol_size| grep 'Sync ' | awk '{print $3}'`"
#SVM_SIZE=$((((BMP_SIZE+((16-1)/16))*16)*2))
#ZFS_SIZE=$((VOL_SIZE-SVM_SIZE))
#SVM_OFFS=$(((34+ZFS_SIZE)))
#echo "Original volume size: $VOL_SIZE, Bitmap size: $BMP_SIZE"
#echo "SVM soft partition size: $SVM_SIZE, ZFS vdev size: $ZFS_SIZE"

What he's doing is getting the numbers to hard format these disks for svm use, and creating a slice for svm and another for zfs.

Now we create a find command or two to make things easier:
This is mine: find /dev/rdsk/c[457]d[01]s0

Now format the drives:
#find /dev/rdsk/c[457]d[01]s0 | xargs -n1 fmthard -d 0:4:0:34:$ZFS_SIZE
#find /dev/rdsk/c[457]d[01]s0 | xargs -n1 fmthard -d 1:4:0:$SVM_OFFS:$SVM_SIZE
#find /dev/rdsk/c[457]d[01]s0 | xargs -n1 prtvtoc |egrep "^ [01]|partition map"

If you missed ZFS 'initializing' a drive, the output won't look right.

Change the find command from above, with the additional selection of only even numbered disks, placing slice 1 of all selected disks into the SVM metadevice d101

# find /dev/rdsk/c[457]d0s1 | xargs -I {} echo 1 $1\{} | xargs metainit d101 `find /dev/rdsk/c[457]d0s1 | wc -l`

Re-use the corrected find command from above, with the additional selection of only odd numbered disks, placing slice 1 of all selected disks into the SVM metadevice d102

# find /dev/rdsk/c[457]d1s1 | xargs -I {} echo 1 $1\{} | xargs metainit d102 `find /dev/rdsk/c[457]d1s1 | wc -l`

Now mirror metadevice d101 and d102, into mirror d100, ignoring the WARNING that both sides of the mirror will not be the same. When the bitmap volumes are createD, they will be initialized, at which time both sides of the mirror will be equal.

#metainit d100 -m d101 d102

Now from the mirror SVM storage pool, allocate bitmap volumes out of SVM soft paritions for each SNDR replica

#OFFSET=1
#for n in `find /dev/rdsk/c[457]d[01]s1 | grep -n s1 | cut -d ':' -f1 | xargs`
do
metainit d$n -p /dev/md/rdsk/d100 -o $OFFSET -b $BMP_SIZE
OFFSET=$(((OFFSET + BMP_SIZE + 1)))
done

I just cut/paste the above, and dropped the # to make sure it would all work.

Generate the SNDR enable on NODE-A

#DISK=1
#for ZFS_DISK in `find /dev/rdsk/c[457]d[01]s0`
do
sndradm -nE sysvolone $ZFS_DISK /dev/md/rdsk/d$DISK sysvoltwo $ZFS_DISK /dev/md/rdsk/d$DISK ip sync g zfs-pool
DISK=$(((DISK + 1)))
done

12). Generate the SNDR enable on NODE-B

#DISK=1
#for ZFS_DISK in `find /dev/rdsk/c[457]d[01]s0`
do
sndradm -nE sysvoltwo $ZFS_DISK /dev/md/rdsk/d$DISK sysvolone $ZFS_DISK /dev/md/rdsk/d$DISK ip sync g zfs-pool
DISK=$(((DISK + 1)))
done

Perform zpool enables On each box:

**** OLD find /dev/rdsk/c[457]d[01]s0 | xargs zpool create zfs-pool
On Opensolaris, I needed awk to get the device names without path
#find /dev/rdsk/c[57]d[01]s0 | awk -F / '{print $4}' | xargs zpool create zfs-pool

Actually I did a raidz, because I'm just not quite sure what's happening yet on each system with the metadevices. I thought they would be two pools of 3 disks, but I still get 6 disks worth of space in the normal zpool.
#find /dev/rdsk/c[57]d[01]s0 | awk -F / '{print $4}' | xargs zpool create zfs-pool raidz

Enable replication:
#sndradm -g zfs-pool -nu

View changes:
#sndradm -g zfs-pool -P
output is:
/dev/rdsk/c4d0s0 -> sysvoltwo:/dev/rdsk/c4d0s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging
/dev/rdsk/c4d1s0 -> sysvoltwo:/dev/rdsk/c4d1s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging
/dev/rdsk/c5d0s0 -> sysvoltwo:/dev/rdsk/c5d0s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging
/dev/rdsk/c5d1s0 -> sysvoltwo:/dev/rdsk/c5d1s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging
/dev/rdsk/c7d0s0 -> sysvoltwo:/dev/rdsk/c7d0s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging
/dev/rdsk/c7d1s0 -> sysvoltwo:/dev/rdsk/c7d1s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: zfs-pool, state: logging

#metastat -p
output is:
d6 -p /dev/md/rdsk/d100 -o 18641 -b 3727
d100 -m /dev/md/rdsk/d101 /dev/md/rdsk/d102 1
d101 3 1 /dev/rdsk/c4d0s1 \
1 /dev/rdsk/c5d0s1 \
1 /dev/rdsk/c7d0s1
d102 3 1 /dev/rdsk/c4d1s1 \
1 /dev/rdsk/c5d1s1 \
1 /dev/rdsk/c7d1s1
d5 -p /dev/md/rdsk/d100 -o 14913 -b 3727
d4 -p /dev/md/rdsk/d100 -o 11185 -b 3727
d3 -p /dev/md/rdsk/d100 -o 7457 -b 3727
d2 -p /dev/md/rdsk/d100 -o 3729 -b 3727
d1 -p /dev/md/rdsk/d100 -o 1 -b 3727

OpenSolaris 2008.11 - Notes for Qmail and Vpopmail

I was very excited to try out OpenSolaris 2008.11. You see, I had a need for active-active replication on the cheap. I also have a new found love of ZFS. ZFS works wonderfully on FreeBSD 7.0, but I'm having bi-monthly issues with that system, and I'm attributing it to ZFS's beta state. Yes, it's 64bit, and has 8GB of RAM. I have also had to tweak some settings, but I just have to have something more stable.

Enter OpenSolaris. A Free OS with the stability of Solaris, along with mature ZFS code, PLUS the recently released Availability Suite into the Open Source community, and I have an excellent solution that fits my problem. At least, on paper. The plan is to have 2 servers, both with a single OS hardware RAID mirrored drive, and 6 JBOD 500GB SATA drives. Using AVS, I will mirror every other drive to the opposite system as shown here:
http://blogs.sun.com/AVS/entry/avs_and_zfs_seamless

Back to my exctement about OpenSolaris 2008.11. Why was I excited? Because 2008.5 didn't support the Areca OR LSI RAID cards I purchased. That really sucked. These things aren't cheap, and I'm trying to do this on the cheap. Fortunately just as I was about to ditch the whole idea, 2008.11 came out with support for Areca.

Installation. As opposed to Solaris (which I also tried, and didn't support my RAID cards either), OpenSolaris' installation program is quite nice. It's very straightforward and simple. I booted off the CD into the GUI system, and clicked 'Install'. I was able to install the OS on my hardware mirrored drives fairly rapidly.

Configuration. Here's where the trouble started - at least, after the driver debacle. I tried to change the IP Address. Sounds simple, doesn't it? Hell no. I'm ssh'd into these machines, and supposedly, you can just change a couple files in /etc. Doesn't work. I also tried the 'sys-unconfig' command to start over from scratch. This cleared the system, but I discovered a new issue: The re-configuration doesn't come up in GUI mode. You MUST select TEXT mode from Grub when booting. Amusingly, this is the only time 'TEXT' mode actually works. If you select to boot into TEXT mode when the system is fully operational, it will happily boot into the GUI after giving you something like 5 lines of output. Nice.

GUI posed a huge problem, I only have a single PS2 port on these servers, and no USB mouse. The GUI environment (GNOME) ABSOLUTELY SUCKS without a mouse. You cannot move around at all. I had to resort to banging on the keyboard to find a combination that would get me out of certain menus. It's awful. Eventually, I found a USB mouse and was able to quickly configure the network on the 2nd machine via the GUI. After a reboot, it's finally active, it's not a 'live' change.

Oh yeah, and edit /etc/nsswitch.conf
Make sure:
hosts: files dns mdns
ipnodes: files dns mdns

This doesn't change automatically for some reason.

I'd also like to note I can't log into the GUI as root, but oddly enough, as 'rick' I can change the network settings and install packages. This is not good.

Now I needed to install my software. At that point, I didn't have a USB mouse, so I was installing via SSH. Bad idea. pkg -r search 'name' is a good way to get a whole list of packages, but the names are all funky. MySQL is SUNWmysql5. Why can't it be just 'mysql5' ? And it's not enabled, so we need:

svcadm enable mysql5
pfexec svccfg import /var/svc/manifest/application/database/mysql.xml
svcs -xv mysql

Now I realize I need packages that the SUN Site (ha!) doesn't have, so we need to add a couple of authorities:

pkg set-authority -O http://blastwave.network.com:10000 blastwave
pkg set-authority -O http://pkg.sunfreeware.com:9000 sunfreeware

Then add the packages:

pkg refresh

pkg install SUNWgcc
pkg install SUNWcurl
pkg install IPSpkgconfig
pkg install IPSgawk
pkg install IPSFWlynx

pkg install perl-dbi

Ok, so after a lot of searching I have some base applications installed, but I need more. I need Perl packages. Ohh, but you can't just compile Perl packages without a hack - that would be silly!

vi /usr/perl5/5.8.4/lib/i86pc-solaris-64int/Config.pm

Find these variables, and set them as follows:
cccdlflags='-fPIC'
optimize='-O3'

Oh, and change the compiler
ln -s /usr/bin/cc /usr/bin/gcc

Now you can use cpan to install Perl modules.

Note: When using useradd, you MUST SUPPLY A VALID SHELL! !#@#!@!
So that means after you add all your daemon users, modify the shell in /etc/passwd.
Maybe there's a better way, I dunno.

Installing Qmail:
groupadd nofiles
useradd -g nofiles -d /var/qmail -s /bin/bash qmaild
useradd -g nofiles -d /var/qmail -s /bin/bash alias
useradd -g nofiles -d /var/qmail -s /bin/bash qmaill
useradd -g nofiles -d /var/qmail -s /bin/bash qmailp
groupadd qmail
useradd -g qmail -d /var/qmail -s /bin/bash qmailq
useradd -g qmail -d /var/qmail -s /bin/bash qmailr
useradd -g qmail -d /var/qmail -s /bin/bash qmails
mkdir /var/qmail
wget http://www.qmail.org/netqmail-1.06.tar.gz
make setup check

Installing vpopmail:
wget http://voxel.dl.sourceforge.net/sourceforge/vpopmail/vpopmail-5.4.17.tar.gz
groupadd -g 89 vchkpw
useradd -u 89 -g vchkpw -d /usr/local/vpopmail -s /bin/bash vpopmail

I had quota issues on my system. Anything over 2GB was wrong. The fix is to change off_t to int64_t in maildirquota.c Why there were no problems on other 64bit kernels, and even 32bit, is beyond me. Other than it being an OpenSolaris issue :/
Configure can be run as you wish, but I had to point to the libdir, and then link the MySQL library into a path where vpopmail could find it.

./configure --enable-auth-module=mysql --enable-rebuild-tcpserver-file=n --enable-ip-alias-domains=y --enable-valias=y --enable-qmail-ext=y --enable-mysql-replication=y --enable-incdir=/usr/mysql/include/mysql --enable-libdir=/usr/mysql/lib/mysql/

ln -s /usr/mysql/lib/mysql/libmysqlclient.so.15 /usr/lib/libmysqlclient.so.15

DOVECOT:
http://dovecot.org/releases/1.1/dovecot-1.1.7.tar.gz
./configure

YAY! No issues on a single running system. I've hosed up my second system while trying to learn AVS, so after I fight though the IP change again and figure out AVS, I'll follow up with another post.

Still Trucking.. I've picked up a contractor gig with a local consulting company, possibly on-site support for 6 clinics, and I just started the Holiday discount at VFEmail.

Oh and I got my Security+ and CCNA certifications! WooHoo!

So in addition to VF IT Services www.vfit.biz, I'm also doing contracting for Sweet Consulting. I've just finished a quickie project of upgrading/integrating SpamAssassin and Horde/Ingo on Etch. There was a little bit of funkiness, as the current setup had the inboxes mail stored locally but the subfolders were in the user's home directory. Just a minor tweak to the ingo driver to write the correct path to the procmail script, and we were good to go.

I also integrated IMAPSync into VFEmail over the weekend. I sent some patches to the Horde folks, and to the IMAPSync dude. Nothing too spectacular. Minor changes to fetchmail in horde to allow more flexibility with external drivers, and IMAPSync '--quiet' and email reporting functions. I really burned myself with Horde before and all my custom code, rather a pita to update. I've got most of it out of the base code now, the last update I did went rather well. I have two RAID cards coming, soon I'll have dual OpenSolaris boxes to put the backend's onto. I was going to use AFS/ZFS HOT Replication, but you need a buttload of drives to do it decently. Using zfsreplicate seems to be a better way. I can utilize much of the disk space, and still have small updates which will allow for an off-site hot backup. I still have a couple issues to work out with that setup though. I have to do a better job with creating domains across all servers so I can start to provide private domains pointed to local accounts.

VF IT Services is moving slower than I had hoped, but it is moving. I got a call to support some clinics in WI, we'll see if that goes through. I'm just a poor sales man. My resume looks nice, but I just can't do that 'Sell Yourself' thing. The other problem I have with resume's is people taking credit for things they oversaw. Like: "Migrated network from Novell to Windows". The majority of people who have that sort of thing in their resume did nothing more than oversee the work. I have a difficult time presenting accomplishments as 'hands on' by default.

I also bought another fxs card for my Asterisk box, and I'm migrating our home number to it. Should be way cheaper than we're paying now for a land line.

Oooooo and on the super-cool front - I found a board that converts RGB-CGA/EGA to VGA! That means I can take any Arcade board (except Nintendo) and just wire it up to a regular monitor. I think that's HUGE. Computer monitors are so much cheaper than Arcade ones, and with the conversion to LCD, there are a lot of CRTs looking for a home...

December Update

We have snow :( I don't mind the snow so much, it's the fact that the snow doesn't exist without it being far too cold out.

I cannot believe how much money we've spent this christmas on the kids. I got them a Wii, and of course the games to go along with it. That in itself exceeded last year's tab, and then there was the regular 'after turkey-day' sales that Shelby hit. Physically, it doesn't look like much, but there's a big invesment there. I'm just dying to play some Wii games though - I think that's going to be a blast.

I also, finally, upgraded to Dish-HD. I've had a plasma for 3 years now, and stupid me (I feel so old now) hooked up the DVD player wrong and wasn't even getting 480i on it. Almost 3 years and I was one of the idiots not doing it right.... Ugh. Anyways, I had a dvr and two tuners. Dish only allows you to lease 4 tuners total (the dvrs are two tuners). Ashley really wanted to watch TV in her bedroom, and that makes 5. So I told Dish I would buy a single receiver, and 'upgrade' to HD-DVR. They could then remove the other receiver, and wire the DVR to two rooms. Now I have 5, no problem. So after taking the afternoon off to wait for these schmucks, they finally show up at 5:10 (20 mins after I normally get home from work). When they're done, they try and leave with a tuner, AND my dvr. wtf? The order is all screwed up. For some reason they think I want to buy a single receiver, and lease a single DVR. Grrrr. So the next day they're supposed to fix it - why I have to wait, I have no idea. So I wait in the morning. They come at noon. Now, dish calls 15 minutes before the guy arrives. Lesson - when dish says 'between x and y', just do whatever the hell you want to do, because it's going to be closer to 'y' when they show up. And give them your cell to call. Then you have time to get home. I ended up taking a day and a half off.. Ugh. Lesson learned - but damn that HD is nice.

In November I migrated Newtek's imaging system off some proprietary windows-only activex web garbage. It's now running Gallery2. Yeah, I know, it's just photo album software. I honestly can't imagine how much more complicated imaging paperwork could be though. You create albums by customer, and sub-albums to sort from there. If you create one image per page (which is how I set it up), everything can be viewed in the browser. The TIFFs I imported at multi-page, so they have to be downloaded, but that's still not a big deal, especially locally. I just need to move the 'View in original format' link to the top of the page. I've had to make small adjustments to how we image new documents - due to the size of the gallery now, but it's actually worked out quite well.

Next I will be building an Asterisk PBX, and linking it to a Fujitsu 9600 and a straight PRI to provide 'unlimited' in house conferencing and IP Phone extensions w/ACD for after hours customer service. That should be a fun one.

VFEmail.net is moving along. I've been trying to figure out how to calculate bandwidth use per user for a while now - the old way just parsed logs and that was slow and error-prone. I'm not sure where it came from, but I suddenly realized all the data I needed was already available in the SMTP session. So I've forced SMTPAuth, which gives me the username, and use the databytes and recipient tarpitting counts to calculate total 'bandwidth' used. A few lines of mysql insert logic, and we have live stats. Local deliveries are already handled with a mailfilter, so it was trivial to throw in another mysql line to add the size of local deliveries to bandwidth used. yay! I can finally catch all the users who change their 'From' address to get around the bandwidth quota!
I also contacted my ISP, and I can go from a FracT1 to dualT1s and a larger IP block for $100/month. That should happen soon, and I think when the T is down, I'll upgrade the disk box to something faster with more room to grow. Hopefully retiring those old scsi drives will cut some of my power usage...

On a more somber note, Patty Seidens died from cancer on November 30th. She was 38. I grew up with Rory (her husband) and Jason Seidens. Their son Spencer plays with Michael, Emily, AND Nick when they're up here from Texas. My friend Jill is involved with Make a Wish, she suggested spring and summer camp... That may be a good thing.

SCO Unixware bites again

OMG - I cannot maneuver through that POS. Specifically it's Unixware 5.0.2

We have an old Intellicenter ACD tied to a Fujitsu 9600 where the SCSI drive is dying. How do I know it's the drive? I've replaced the whole system. You know how hard it is to find working motherboards with ISA slots? I ended up using my personal PIII-800 (ok, so it's not well used recently) as it has an AGP, 3 PCI, and 2 ISA slots, and works like a dream. I actually bought this from Scott Congdon probably 8 or 9 years ago. I raised it all the way from a PII-233. *sigh*

Anyhoo. Apparently you can't just Ghost an older SCO installation. The OS REALLY likes to know what the drive parameters are in some wacky way. So if you do dparam /dev/rhd0 `dparam /dev/rhd0` (I think that's the right device) it'll hardcode the hd param into the boot info, and THEN you can ghost the drive. Otherwise trying to boot off your new drive will result in a 'boot error'.

Unfortunately for me, the source drive was really on it's last leg and I have corrupted Oracle data. But again, it's SCO, so I have no clue where the damn Oracle server even starts from. ARGH!!! I'll be returned to work again at night to restore an older ghost back to the original (GASP!) drive and hopefully it'll last long enough to get a good ghost back to the new scsi drive.

What a headache. You'd think an ACD machine would run raid.

First Post!

I just FPd myself. ew. Don't say that outloud. So I bascially created this because I was in IRC today and someone mentioned Shoryuken. So of course I had to go look up Derek again - I haven't seen him on ICQ lately, though my Kopete hasn't been connecting to ICQ properly, and I don't really talk to anyone anyways.

So Derek, if you see this, remember when the four of us (you,me,Scott, Andrew) where playing a game at my house - I'll be damned if I can remember the name. I actually may have this day on video tape. Anyways, it was that Kings Quest type game, with FPS type combat... there was one point where you had to climb up into a cave and chat with the hermit. I said one day, I'm going to be a hermit. Not out of choice, but that's just what was going to happen.

I am such a hermit.